System shelf 775x600x1800 mm

- Material: stainless steel 1.4301
- Shelf uprights made of 25 x 25 x 1.2 mm square tube, cross struts made of folded flat profile 52 x 2 mm.
- Firmly welded-in bolts 0.7 mm, distance 150 mm from the shelf support.
- Sealing of the uprights by means of screw feet with height adjustment at the lower tube ends and plastic plugs at the upper tube ends.
- Perforated shelves from 600-1000 mm length with 0.8 mm, from 1200 mm length with 1.0 mm tray thickness.
- Staggered rows of holes, burr-free countersunk elongated holes 40 x 15 mm
- All shelves are folded 50 mm long and 43 mm at the front and folded inwards without burrs.
- Diagonal bracing flat steel 25 x 2 mm / including cap nuts for fastening.
- Corner extension possible with corner connection clips made of stainless steel.
- In the case of corner extension, the shelf load of the load-bearing shelves is reduced to 70% of the values ​​given below.